How to Build a Brick Walkway in the Garden (2022)

How to Build a Brick Walkway in the Garden (1)Family HandymanUpdated: Apr. 22, 2022

Build this handsome backyard feature in one weekend.

How to Build a Brick Walkway in the Garden (2)Family Handyman

Next Project

How to Build a Brick Walkway in the Garden (3)Time

Multiple Days

How to Build a Brick Walkway in the Garden (4)Complexity

Intermediate

How to Build a Brick Walkway in the Garden (5)Cost

Varies

Introduction

Make a simple garden path from recycled pavers or cobblestones set on a sand bed. Learn all the details of path building, from breaking cobblestones to easy, fast leveling using plastic landscape edging.

Tools Required

  • 3-lb. hammer
  • Edging spade
  • Hand tamper
  • Hearing protection
  • Knee pads
  • Leather gloves
  • Level
  • Mason's chisel
  • Rubber mallet
  • Safety glasses
  • Spade
  • Utility knife
  • Wheelbarrow

Materials Required

  • Cobblestones
  • Edging stakes
  • Granite pavers
  • Plastic landscape edging
  • Sand
  • Spray marking paint

Brick Walkway Overview

You don’t need heavy equipment and a week of work to lay an attractive and durable walkway. We designed this path, one of our favorite garden path ideas, with bricks for simplicity and ease of construction. It’s made from old street pavers and granite cobbles set on a sand bed. But you can substitute just about any pavers or types of stones that are readily available and fit your landscape. The stone-setting techniques will even accommodate stones of varying thicknesses. You can build this path in about two weekends using a shovel, a wheelbarrow and a few inexpensive hand tools.

We’ll walk you through all the path-building details, from breaking ground to breaking the cobbles to fit tight spots. Usually, the main stumbling block is making the path smooth and flat. To solve that problem, we’ll show you a simple leveling technique using ordinary plastic landscape edging. With this technique, you can lay a top-notch path, even if you’re a novice.

Project step-by-step (22)

Step 1

Garden Path and Bench

How to Build a Brick Walkway in the Garden (6)

We integrated a seating area into our pathway. Also, keep in mind that we designed this path for foot traffic and other light use. Don't try to drive on it. Because the path is set only on sand, it won't stay as flat and smooth as a traditional paver walk set on a compacted gravel bed. It's ideal for narrower secondary walks in a garden or backyard, where slight imperfections and undulations add to its character. And if an edge stone gets loose from a wheelbarrow bouncing over it, you can reset it in minutes. Expect to pull an occasional weed growing up in the joints. Or if you prefer an English cottage look, encourage moss or other ground covers to grow in the joints.

Step 2

How to Install Brick Pavers

Path Details and Materials

How to Build a Brick Walkway in the Garden (7)

The path is set on several inches of sand base and bordered by hidden landscape edging with the tube cut off. To achieve the aged, timeless look, you'll have to track down old street pavers. If you're lucky, you may be able to salvage material from a local project. Otherwise look for older materials at a landscape supplier or an architectural salvage store. Expect to pay a dollar or more apiece for old pavers. The size varies but it usually takes 4.5 to cover a square foot. The granite cobblestone isn't antique; the stones were run through a rock tumbler to make them look worn. We paid a premium for these. Figure on three cobbles per linear foot of the path. Use ordinary washed concrete sand for the setting bed. Figure on 1 cu. yd. per 80 sq. ft. of the path.

Have the pavers, cobbles and sand delivered. Use a “contractor's grade” landscape edging for the border. Buy it from a landscape supplier in 20-ft. strips that are stored flat. (If you gently bend each in half, you can wrestle them into a sedan with the windows open.) They usually come with stakes, but buy a few extra packs to hold the edging down better. Don't buy the edging that's coiled up in a box; it's difficult to uncoil and set smoothly.

You'll need a couple of special tools to do first-class work: a hand tamper and a deadblow hammer or rubber mallet. You can get these at a home center. You'll also need a 3-in. mason's chisel and a 3-lb. hammer to split the pavers. Then grab your yard shovels and wheelbarrow and go to work. Learn some other amazing things you can do with your hammer here.The following steps will walk you throughhow to install brick pavers yourself.

(Video) Installing a Brick Pathway in Front of Our Gazebo! 💪🙌// Garden Answer

Sign Up For Our Newsletter

Complete DIY projects like a pro! Sign up for our newsletter!

Step 3

Start by Laying Out the Path

How to Build a Brick Walkway in the Garden (8)

The first step in how to install brick pavers is to plan the path layout. You can use a garden hose to help you lay out your path. But the photo above shows another technique. Define the sitting area first, dot the key starting end and center points, then connect the dots with a smooth line. Stakes work well to mark a curve, then simply connect the stakes with paint. Don't worry about making mistakes with the paint; your next mowing will erase them. Gradual curves work best; curves with a radius tighter than 5 ft. result in unsightly wide gaps between the pavers.

Step 4

Figure B: Measure the Path Width

How to Build a Brick Walkway in the Garden (9)

Plan your path width to the full brick, then add a few inches to the width of your excavation for wiggle room for the slightly wider spacing needed on a curve. Make your path anywhere from 2 to 3 ft. wide. Anything wider will look out of scale in a garden setting.

Step 5

Roll Up Your Sleeves and Dig Out the Path!

How to Build a Brick Walkway in the Garden (10)

When you're digging through sod, it's always easiest to drive the shovel through the grass and push it into the excavation. When you're on a slope, use gravity in your favor. Start at the bottom and back your way up the hill. Use the blade of a round-nose shovel as a rough depth gauge. Stepping it almost all the way in is about a 7-in. depth. Roughly dig out the entire path, then shave one of the sides back to the paint line with an edging spade held vertically. Finally, shave the bottom flat with either shovel. You'll be amazed at how much dirt will come out of that narrow little path. If possible, find a place for it onsite by building a berm or adding soil around the house to improve drainage. Otherwise, roughly calculate the volume of soil you have to remove and rent a roll-off container for soil disposal.

Before you dig, ask your local utility to locate any buried lines. (Call 811 from anywhere in the country.) Give the company at least two days. If you have buried electric lines running out to a garage or yard light, turn off the circuit at the electrical panel while you dig. Also, locate any sprinkler heads and landscape lighting and dig carefully around them.

Step 6

Install Edging

How to Build a Brick Walkway in the Garden (11)

The top of the plastic landscape edging will be the finished height of your path. Set it a little higher than the surrounding lawn or garden so water will drain off the path. Set the top of the tube flush where the path meets a patio or driveway, along the vertical cut edge. Splice sections by cutting away 7 in. of the top tube, inserting a splice tube, then overlapping the sections. The heavy-grade plastic edging will form a smooth, flat surface, without telegraphing the minor dips or bumps in your lawn. Most edging has a little lip on the bottom to keep it from creeping up.Set this to the inside of the path.

Step 7

Spike the Edging to the Sod

How to Build a Brick Walkway in the Garden (12)

Hold the top of the tube about an inch above the sod and drive spikes every 5 ft. through the edging into the side of the excavation.

Step 8

(Video) How to Lay a Brick Paver Walkway | This Old House

Place the Other Side of the Path

How to Build a Brick Walkway in the Garden (13)

With one side spiked in place, notch a 32-in. 1×6 screed board to the desired path width and use it as a guide to trim and edge the second side of the excavation. Set this edging side about 1/2 in. higher or lower to encourage drainage from the path. At the 4-ft. wide seating area, allow a 1-in. height difference across the entire width.

Step 9

Add Sand

How to Build a Brick Walkway in the Garden (14)

Now add sand to a level about 3 in. below the top of the tube and compact it firmly. Although a motorized plate compactor works best, a hand tamper works fine for a small, informal path like this. The sand should be slightly damp when you tamp it to help it pack. Sprinkle it with water if it's dry.

Step 10

Screed

How to Build a Brick Walkway in the Garden (15)

To flatten it, place the ears of the screed board on the edging and pull a ridge of sand down the path, filling in any depressions as you go. Smooth the sand 4 in. below the top of the tube. Work from the top of the slope downhill.

Step 11

Trim the Tube

How to Build a Brick Walkway in the Garden (16)

Whether you remove the edging tube is purely a matter of aesthetics. If you don’t mind the appearance of the tube, leave it on. To trim the edging, cut the tube off the top of the plastic edging with a sharp utility knife. Keep the cut at or slightly below the soil level to keep it out of sight.

Step 12

Seating Area

How to Build a Brick Walkway in the Garden (17)

Figure out the seating area dimensions by roughly laying out the pattern on your driveway. Then set the sand base in the same manner as the path, by placing edging on two sides to serve as screed guides. (Use a longer screed board.) Because you'll be setting a bench on it, make the surface relatively level. Only allow a 1-in. height difference from one side to the other. Because our project was on a slope, we had to hold the edging 2 in. above the sod on one side. Then after laying the pavers, we added soil to build that edge up. Lay the pavers in staggered rows (a running bond pattern) that wraps around the sides. Start at the outside and work your way around to the middle. It'll take a bit of fiddling to get the pavers to fit. You'll have to space some pavers up to 1/4 in. apart and cut a few as well. The informal design allows for looser spacing. Sand will fill the gaps.

Step 13

Set the Pavers with Staggered Joints

How to Build a Brick Walkway in the Garden (18)

Laying the pavers will move quickly, especially if you have a helper feeding them to you. Start where you want the best fit, usually where the path meets a patio, walk or driveway. Set one side of the cobbles first and follow along with the pavers, staggering each row by half a paver. Set each one in the sand with a few whacks of a deadblow hammer. As you work your way through a curve, the stagger will change because of the wider radius at the outside of the curve. If the joints from row to row come within 1 in., simply insert a half paver to increase the separation.The pavers height will set in pretty uniformly.

Step 14

Adjust the Sand to Fit the Cobbles

How to Build a Brick Walkway in the Garden (19)

Remove or add sand as needed to accommodate the uneven thickness of the granite cobbles and to keep the top of the path flat.

Step 15

Mark Cuts in Place

How to Build a Brick Walkway in the Garden (20)

Measure the cuts by holding the paver in place and marking one edge. Use a square to extend the mark completely around the paver.

Step 16

Cut the Paver

How to Build a Brick Walkway in the Garden (21)

The best way to cut a paver is to split it, but it’s a little tricky because pavers are extremely hard. The resulting ragged edge is in keeping with the worn and tumbled look. Work on a soft surface like the lawn or a pile of sand. Strike the paver sharply on all sides with a 3" mason's chisel and a 3-lb. hammer, turning it from the top to the bottom, then side to side. Hold the chisel perpendicular to the face of the paver. Don’t try to split off anything smaller than about 1-1/2 in. It just won’t break cleanly.Finally, save the cutoff pieces. Chances are you can work them in somewhere.

(Video) How To: DIY Budget Brick Walkway From An Old Chimney

Step 17

Adjust Spacing

How to Build a Brick Walkway in the Garden (22)

Hide large gaps up to 1-1/2 in. by shifting adjacent pavers up to 1/4 in. apart. Avoid using paver pieces less than about 1-1/2 in. long.

Step 18

Fill the Sides

How to Build a Brick Walkway in the Garden (23)

Fill in along the side of the path with topsoil and tamp firmly with your foot.

Step 19

Work Sand Into the Gaps

How to Build a Brick Walkway in the Garden (24)

The last step is to fill the joints with sand. Sweep the sand into the joints, leaving a thin layer on top. Then let it dry and sweep it in again, working the broom back and forth until the joints are full. Save some sand to sweep into the joints after the first rain. Your path will need little or no maintenance; in fact, it will just continue to look better as it ages.

Step 20

Garden Bed Edging

How to Build a Brick Walkway in the Garden (25)

Add a garden edging with extra cobbles to create flower beds and blend the path and garden into the yard. Leave the cobble tops slightly above the ground level to create a nice edge for easy lawn mowing.

Step 21

(Video) Building A Paver Walkway That Will Last.

Cut Trench

How to Build a Brick Walkway in the Garden (26)

Cut a clean 5 x 5-in. trench with an edging spade. Then add a few inches of sand.

Step 22

Place Cobblestone

How to Build a Brick Walkway in the Garden (27)

Push each cobblestone into the sand, leaving the top about 1/2 in. above the bed. Set it with a whack of a deadblow hammer. That's it! Now you've completed one of our favoritegarden ideas with bricks in your own landscape.

Check out another affordable garden path idea, too.

Originally Published: July 05, 2019

Similar Projects

How to Build Pathways: Brick and Stone Pathways
How to Build a Stone Fire Ring
How to Build a Post and Beam Pavilion
How to Build a Brick Fire Pit
Asphalt Repair and Crack Filling
How to Build a Table with a Concrete Top
Masonry: How to Repair Mortar Joints
Modern Stone Installation Tips
How to Repair Mortar Joints
How to Seal an Asphalt Driveway
How to Replace Spalling Bricks
How to Cut Concrete
How to Install a Glass Block Shower
How to Install Stone Facing
How to Install a Durable Asphalt Driveway
How to Maintain and Repair Your Chimney
How to Choose Modular Concrete Block
How to Repair Broken Bricks
How to Reset a Loose Brick
How to Build an Outdoor Table

Beautiful (and affordable) DIY garden path ideas that you can build in a weekend, without breaking the bank or your back, to spruce up your yard.

Since these path materials are lighter than stone, they’re easier to haul and spread.. For a path that’s more formal or longer lasting than a mulch path, consider washed gravel, crushed stone or crushed shells.. Gravel or mulch paths require edging to keep the material from spreading out onto your lawn or flower bed.. Metal edging is a must for mulch or gravel walkway ideas because it keeps gravel or mulch from overflowing into the yard or garden.. If you’re building a short stepping-stone path, you can usually pick the stones you want from the pallet or pile of stones on hand at the supplier.. Spread a 1/2- to 1-in.-thick layer of sand under the stone if you want to make leveling the stones easier.. Including ground cover plants in your garden path makes a stone walkway easier in two ways: First, you can skip the thick, compacted gravel base underneath.. Then cut along the edge of the stones with a flat spade to outline the path.

A wooden walkway makes an attractive and inexpensive garden path, is simpler and less backbreaking to make than a stone or concrete path.

deck screws 4x4 x 10-ft. (treated) post 5/4x6 x 8-ft. deck boards Joist hanger nails Mason's twine Pea gravel Spray marking paint. But enough chitchat—here’s how to build a walkway of your own!. Screw the side joist to the posts with two 3-1/2-in.. Start on the other side of the walkway by cutting a 27-in.-long end joist for each step.. Cut the 8-ft. decking into 4-ft. lengths.. Most of the time you’ll be able to simply open up the decking gaps at one side a bit more than at the other (see “Decking Tight Curves,” below).. (Marking every other deck board is enough.). The last step is to cut the curves.. How to Build a Stone Path and Steps. How to Build a Deck Over a Concrete Patio

Interested in building an outdoor walkway, but not sure which material to use? See how all the outdoor walkway materials stack up against each other in this post.

Walkways can be built with subtle materials that blend the landscape or colorful materials that add visual interest.. Your walkway design and your choice of outdoor walkway materials can have a major impact on your landscape.. When you have defined the purpose of your walkway, you can make better decisions on design and outdoor walkway materials.. How your walkway will be used is important to selecting the right outdoor walkway materials.. Stamped Concrete – Stamped concrete mimics other outdoor walkway materials like stone or slate.. By using different patterns and shapes, you can create a beautiful walkway that looks like more expensive natural stone.. Concrete offers a durable, resilient and cost-effective choice for outdoor walkway materials.. Natural stone is the most popular of all the outdoor walkway materials, however it’s also the most expensive.. It provides a durable and resilient surface for outdoor walkway materials, but it is porous and needs to be sealed once or twice a year for protection from spills, stains and adverse weather conditions.. If you’re looking for outdoor walkway materials that have a natural, rustic appeal, aggregate stone and rock are good choices.. Aggregate Stone – Crushed stone, pea stone and other aggregate stones create a very casual landscape walkway.. Since these outdoor walkway materials are loose stones, they can stick to your shoes or get kicked off the walkway into the yard.. Brick outdoor walkway materials come in full size bricks that require mortar, as well as interlocking brick pavers that are much thinner.. Brick is a durable, strong material for outdoor walkways.

These front yard walkway ideas aren't just about getting from A to B – they will elevate your home's exterior, too

At first thought, front yard walkway ideas can seem one of the most mundane aspects of designing a garden.. While they might be necessary for traipsing through your front yard, front walkways are not necessarily known for their style, and they may not be at the forefront of your mind when researching for inspiration.. These 15 stunning front yard walkways should provide the perfect inspiration for all your front yard landscaping ideas .. From rustic to contemporary the best front yard walkway ideas are created with materials that don't just complement the design of your home, but the other elements of your outdoor space, from your front porch ideas , to the mailbox landscaping ideas at the end of the path, says landscape designer Kate Anne Gross (opens in new tab).. For a simple, classic front yard walkway idea, line a path with gray gravel or stones like The Fox Group (opens in new tab) did at this traditional home.. As this yard from Mindy Gayer (opens in new tab) proves, your front walkway ideas don’t have to follow the straight and narrow.. This yard from KAA Design Group (opens in new tab) masters the look with a front yard walkway that blends seamlessly with contemporary walling.. The blogger finished the look by lining the path with larger stones – making the walkway feel like a more intentional addition to the front yard and drawing the eye towards the classic porch.. If you’d like to elevate your gravel walkway – literally – consider reimagining the tiered treatment Grace Design Associates (opens in new tab) used in this setup into your front yard.. Front yard walkway ideas with loose materials are simple enough for anyone to build.. According to landscape designer Kate Anne Gross of Kate Anne Designs, materials like flagstone, brick, concrete, and bluestone make some of the best materials for a hardscaped front walkway.

Videos

1. Watch This Video Before Building A Brick Walkway - Landscaping Tips
(gregvancom)
2. How to Build a DIY Paver Walkway
(Weekend Woodsmen)
3. How to Build a Concrete Paver Walkway | This Old House
(This Old House)
4. Create an Old Brick Path— DIY Timelapse
(Lick Our Love)
5. How to Lay a Real Brick Path (with a laugh)
(Skill Builder)
6. BUILDING A RECLAIMED BRICK AND STONE PATHWAY : Adventuring Family of 11
(Knorpp and South)

You might also like

Latest Posts

Article information

Author: Catherine Tremblay

Last Updated: 08/28/2022

Views: 6290

Rating: 4.7 / 5 (67 voted)

Reviews: 90% of readers found this page helpful

Author information

Name: Catherine Tremblay

Birthday: 1999-09-23

Address: Suite 461 73643 Sherril Loaf, Dickinsonland, AZ 47941-2379

Phone: +2678139151039

Job: International Administration Supervisor

Hobby: Dowsing, Snowboarding, Rowing, Beekeeping, Calligraphy, Shooting, Air sports

Introduction: My name is Catherine Tremblay, I am a precious, perfect, tasty, enthusiastic, inexpensive, vast, kind person who loves writing and wants to share my knowledge and understanding with you.