The Hinged Hoop House 2.0 (2023)

610 Shares

The hinged hoop house version 2.0. Bigger and better than before.

The Hinged Hoop House 2.0 (1)

Skip right to the instructions.

If you were hanging around here a year ago you saw me give birth to my original hinged hoop house. I say give birth because I was as proud of it as most women are of their first born. Also it took around a day and a lot of grunting to bring it into the world.

But as one does with their first child, I made a lot of mistakes. Mistakes I was able to rectify with the second! Version 2.0 of the hinged hoop house is very similar to the first, with a few changes. Last year I found my original hoop houses weren't quite tall enough to accommodate a full grown black kale or Brussels sprouts plant. Not that I really care about the Brussels sprouts, I hate them, but I grow them because they look pretty and it's hard to look pretty when you're all hunched over and bent.

I also had some holes chewed into the netting over the winter by delinquent voles or mice and to replace the netting I would have had to unscrew all kinds of wood pieces that I had used to secure the netting in the Hinged Hoop House version 1.0 So I rethought that and came up with what I think is a really good solution.

The original was also a tiny bit wiggly so I beefed it up a little and improved on the top cross bar that holds everything steady.

All of the materials I've listed are available at a regular hardware store, other than the extra wide insect netting, which I've linked to on Amazon.

Ready for it?

Hinged Hoop House 2.0

Materials - (For an 8'x4' raised bed.)

8' lengths of 2x4s, (3)

4' length of 2x2, (1)

10' lengths of ½" Schedule 40 electrical conduit, (6)

Clamps for ½" conduit, (12)

3-4 hinges

24" lengths of chain, (2)

½" PVC "Ts", (2)

½ " PVC cross, (1)

Insect netting, (wide and long enough to cover completed hoops)

Handle

Variety of screws

Screwdriver or drill

The Hinged Hoop House 2.0 (2)

You'll find the white PVC fittings in the plumbing aisle of the hardware store and the grey, conduit and fittings in the electrical aisle.

The Hinged Hoop House 2.0 (3)

I need another hinge, because you should really use 3 or 4 but I only had 2 in my stash so I'll add another one when I go to the hardware store and pick another couple up.

Instructions

  1. Cut your 8', 2x4's to the length and width of your current raised bed.

The Hinged Hoop House 2.0 (4)

2. Lay all your cut 2x4 pieces on your raised bed and screw them together.

The Hinged Hoop House 2.0 (5)

3. For added strength and to prevent any warping screw a 2x2 into the centre of the frame.

The Hinged Hoop House 2.0 (6)

3. Screw in your hinges.

The Hinged Hoop House 2.0 (7)

4. Cut 3 of the electrical conduit into 57" lengths. This will create hoops that are tall enough for kale, pepper plants and brussels sprouts. If you're growing lower things like cabbage, you can shorten the lengths of your conduit for lower hoops.

The Hinged Hoop House 2.0 (8)

5. Screw the plastic clamps to the inside of the 2x4 frame. Each section of pipe will have 2 clamps holding it in place. Screw the top clamp in first. To get a straight line between two clamps, insert a piece of pipe into the top clamp and then screw in the bottom clamp around the pipe, like you see below.

The Hinged Hoop House 2.0 (9)

6. Once all your clamps are in, attach 2 pieces of your 57" pipe at the centre using a PVC T. You can glue these, but I didn't in case I wanted to change things. Stick one end of the pipe into its clamps then slowly and carefully bend the pipe to fit in the opposite clamps. Pay attention to your PVC T and make sure it's sitting straight, ready to accept the top horizontal rail later on. (you don't want it pointing up or down)

The Hinged Hoop House 2.0 (10)

7. Screw the pipe into the frame to keep it from slipping up or down.

The Hinged Hoop House 2.0 (11)

8. Continue doing this until all your hoops are built and secured. For the middle hoop you'll be using the PVC cross, as opposed to the PVC T.

The Hinged Hoop House 2.0 (12)

9. Measure the space between the top of the hoops and cut 2 lengths of conduit to create the top bar across the hoop house.

The Hinged Hoop House 2.0 (13)

10. Insert the 2 pieces of newly cut conduit across the top of the hoops, inserting it into the PVC Ts and PVC cross.

The Hinged Hoop House 2.0 (14)

11. Cut your final 2 lengths of conduit to 8' long (or however long your frame is) and screw it onto the outside of both long ends of the frame like you see above. You'll use these to clip the netting to once it's on.

12. To hold the bunched up sides of the net in place I used a piece of 1" conduit and a piece of old garden hose. You'll see how it holds the netting in a second. This is the one area of the hoop house that could be improved upon and probably will be. I just used the spare materials I had at the garden to make it work.

***I've left these things out of the materials list because they were weird random things I found and I'm sure you can make something similar work out of your own garbage***

The Hinged Hoop House 2.0 (15)

13. Drape your netting over the hoop frame. Do NOT attempt to do this on a windy day by yourself; it will end with tears and parasailing.

The Hinged Hoop House 2.0 (16)

14. Clip the netting to the lengths of conduit on the outside of the frame. I just used plant clips that I got at Dollarama but I've ordered these clips from Amazon which will be a bit more discrete and a bit stronger.

I could have used this same technique for the sides of the hoop house instead of what I scrabbled together but I was worried that becaase there's so much extra fabric on the ends of the hoop house that it would be difficult to fold it all together neatly. I think I was wrong. I may still try to do the ends the same as I did the sides.

The Hinged Hoop House 2.0 (17)

15. Twist the netting together tightly on the ends and slip it through your small piece of 1" tube (or whatever you decide to use). You'll have to pull it tightly and work it through. Once it's through, pull the netting so it's even and then tie the end in a knot so it can't slip out.

This is the side section I mentioned could be improved upon for holding the side of the netting. It's a bit inelegant but it works. The fabric has to be held tight but I wanted something that was also easy to remove if I have to change out the netting.

The Hinged Hoop House 2.0 (18)

14. Attach a length of chain between the raised bed frame and the hinged hoop house. This will hold the lid open when you lift it and prevent it from tipping all the way over to the ground.

TIP: You can also get fancy and use gas struts.I may do that in the future.

The Hinged Hoop House 2.0 (19)
15. Add a handle for opening and closing the frame.

Your hinged hoop house is built!

The Hinged Hoop House 2.0 (20)

Now all that's left to do is fill it with vegetables. Pepper plants will be going in this one. Have you ever grown peppers that you thought were perfect, but when you cut them open you realized they were rotted on the inside and mushy? That's from the pepper maggot. A fly lands on the pepper plant when it's very young and lays an egg under the skin of the pepper. That egg hatches into a maggot which lives in and consumes the entire inside of your pepper until it rots, and the maggot eats its way out of the pepper. This hoop house prevents all that.

This hoop house is much heavier to open and close than the first one was because it's made with 2x4s instead of 2x2s, plus it has the wood cross bar. I'd estimate it weighs about 20 pounds.

To prevent critters from gnawing away on the netting in the winter it's very easy now for me to remove the netting for the season. It wasn't easy with the first version of this hoop house. I can also, if I want, just prop open the lid so any critters can come and go easily without chewing through anything in the winter. I wasn't smart enough to think of that logical solution myself, an Instagram reader said that's what I should do.

Otherwise leaving the netting on wasn't a problem. Snow just slid right off of it.

Oh. And because I'd done it once already it took a lot less grunting and time to bring this second one into the world. As is often the case.

→Follow me on Instagram where I often make a fool of myself←

The Hinged Hoop House 2.0 (21)

Top Articles
Latest Posts
Article information

Author: Rev. Leonie Wyman

Last Updated: 01/17/2023

Views: 6729

Rating: 4.9 / 5 (59 voted)

Reviews: 90% of readers found this page helpful

Author information

Name: Rev. Leonie Wyman

Birthday: 1993-07-01

Address: Suite 763 6272 Lang Bypass, New Xochitlport, VT 72704-3308

Phone: +22014484519944

Job: Banking Officer

Hobby: Sailing, Gaming, Basketball, Calligraphy, Mycology, Astronomy, Juggling

Introduction: My name is Rev. Leonie Wyman, I am a colorful, tasty, splendid, fair, witty, gorgeous, splendid person who loves writing and wants to share my knowledge and understanding with you.